The OBIFOLD multi flatwork folder is able to fold the complete range of small and large flatwork linen, like bed linen, table linen, napkins, pillow cases etc. Each folder is built to a simple yet durable design that achieves both high quality folding and high production rates.
The OBIFOLD multi makes 2 or 3 primary folds in up to 4 lanes and 1, 2 or 3 (internal) cross folds in single lane.
All cross folds are made by knife.
Each piece is measured before it enters the first primary fold. The microprocessor selects the appropriate primary fold settings. Now folded, the piece is measured again prior to entering the cross-fold section initiating the desired cross-fold settings. After the cross folds are made, the piece is discharged towards the stacker station.
The folder can be supplied with a single or double drop-stacker. It is possible to work without a stacker as well (pieces are discharged to a delivery-table).



Maintenance-free transmission due to timing belts and flat belt drive. No lubrication required.
No clutches, no brakes.
All photocells are of the proximity type and maintenance free (face down, no use of mirror).
Automatic speed synchronisation with ironer (8 – 50 m/min)
Automatic fold selection based on piece dimensions
All cross folds are made by mechanical knife.
Wide cross fold section (900mm)
Anti-static bar is optional.
Scanner is optional




Working width: 3000, 3300 or 4000mm
Number of primary folds: 1, 2 or 3
Number of lanes (primary fold): 1, 2, 3 or 4
Number of lanes (cross fold): 1
Number of cross folds: 1, 2 or 3
Maximum piece width (cross fold): 900mm
Air pressure: 6 bar
Air connection: Ø13mm
Power supply: 3 x 380V, 50Hz (other supplies on request)
Power: 2.5 kW